建立一個普通的Linux分區（主分區、邏輯分區均可）
fdisk /dev/sdb
Command (m for help): p
Disk /dev/sdb: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740e36e3
Device Boot Start End Blocks Id System
/dev/sdb1 63 4194367 2097152+ 83 Linux
/dev/sdb2 4194368 16777215 6291424 5 Extended
/dev/sdb5 4194431 8388735 2097152+ 83 Linux
/dev/sdb6 8388799 16777215 4194208+ 83 Linux
以sdb6為例，可以看到分區的十六進制編碼是83，即普通的Linux分區。
修改分區類型的十六進制編碼
//t命令：改寫分區十六進制編碼
Command (m for help): t
Partition number (1-6): 6
//L命令可以查看不同分區的十六進制編碼，交換分區為82
Hex code (type L to list codes): 82
Changed system type of partition 6 to 82 (Linux swap / Solaris)
Command (m for help): p
Disk /dev/sdb: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740e36e3
Device Boot Start End Blocks Id System
/dev/sdb1 63 4194367 2097152+ 83 Linux
/dev/sdb2 4194368 16777215 6291424 5 Extended
/dev/sdb5 4194431 8388735 2097152+ 83 Linux
/dev/sdb6 8388799 16777215 4194208+ 82 Linux swap / Solaris
//分區表寫入磁盤并退出
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
格式化交換分區
mkswap /dev/sdb6
Setting up swapspace version 1, size = 4194204 KiB
no label, UUID=40eff2c0-3f6b-440e-bc2a-f71d3d5581a7
啟用交換分區
swapon /dev/sdb6
查看交換分區加載狀態
free
total used free shared buffers cached
Mem: 1030108 160768 869340 264 12040 56188
-/+ buffers/cache: 92540 937568
Swap: 6291352 0 6291352
停用交換分區
swapoff /dev/sdb6
p.s.
不能直接使用mount命令掛載swap分區，因?yàn)閟wap分區是沒有掛載點的。
直接修改/etc/fstab配置文件，使系統啟動時自動掛載：
/dev/sdb6 swap swap defaults 0 0
//查看交換分區
swapon -s
Filename Type Size Used Priority
/dev/sda2 partition 2097148 0 -1
/dev/sdb6 partition 4194204 0 -2
總結
以上所述是小編給大家介紹的Linux添加swap分區的方法，希望對大家有所幫助，如果大家有任何疑問歡迎給我留言，小編會及時回復大家的！
